Amakomaya Nepal FHIR Implementation Guide
2.0.0 - ci-build Nepal

Amakomaya Nepal FHIR Implementation Guide - Local Development build (v2.0.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: AMKAppointment - Detailed Descriptions

Active as of 2026-08-21

Definitions for the amk-appointment resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Appointment
Definition

A booking of a healthcare event among patient(s), practitioner(s), related person(s) and/or device(s) for a specific date/time. This may result in one or more Encounter(s).

ShortA booking of a healthcare event among patient(s), practitioner(s), related person(s) and/or device(s) for a specific date/time. This may result in one or more Encounter(s)
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsapp-2: Either start and end are specified, or neither (start.exists() = end.exists())
app-3: Only proposed or cancelled appointments can be missing start/end dates ((start.exists() and end.exists()) or (status in ('proposed' | 'cancelled' | 'waitlist')))
app-4: Cancellation reason is only used for appointments that have been cancelled, or noshow (cancellationReason.exists() implies (status='noshow' or status='cancelled'))
app-5: The start must be less than or equal to the end (start.exists() implies start <= end)
app-6: An appointment may have an originatingAppointment or recurrenceTemplate, but not both (originatingAppointment.exists().not() or recurrenceTemplate.exists().not())
app-7: Cancellation date is only used for appointments that have been cancelled, or noshow (cancellationDate.exists() implies (status='noshow' or status='cancelled'))
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id.trace('id') in %resource.descendants().select(reference | as(uri))) or descendants().where(reference='#' | as(uri)='#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Appointment.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. For DomainResources, if more than one implicitRules policy applies, additional policies may be conveyed using the additionalImplicitRules extension.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Appointment.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. Contained resources may be a resource type defined in the FHIR specification, or an additional resource.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. Appointment.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Appointment.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. Appointment.status
    Definition

    The overall status of the Appointment. Each of the participants has their own participation status which indicates their involvement in the process, however this status indicates the shared status.

    Shortproposed | pending | booked | arrived | fulfilled | cancelled | noshow | entered-in-error | checked-in | waitlist | unknown
    Comments

    If the Appointment's status is "cancelled" then all participants are expected to have their calendars released for the appointment period, and as such any Slots that were marked as BUSY can be re-set to FREE.

    This element is labeled as a modifier because the status contains the code entered-in-error that mark the Appointment as not currently valid.

    Control1..1
    This element is affected by the following invariants: app-4, app-3, app-7
    BindingThe codes SHALL be taken from AppointmentStatushttp://hl7.org/fhir/ValueSet/appointmentstatus|6.0.0-ballot5
    (required to http://hl7.org/fhir/ValueSet/appointmentstatus|6.0.0-ballot5)

    The free/busy status of an appointment.

    Typecode
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Appointment.start
    Definition

    Date/Time that the appointment is to take place.

    ShortWhen appointment is to take place
    Comments

    If actual start/end times are not known then the requested period start/end can be used.

    Control10..1
    This element is affected by the following invariants: app-5, app-3, app-2
    Typeinstant
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Appointment.end
    Definition

    Date/Time that the appointment is to conclude.

    ShortWhen appointment is to conclude
    Comments

    If actual start/end times are not known then the requested period start/end can be used.

    Control0..1
    This element is affected by the following invariants: app-5, app-3, app-2
    Typeinstant
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Appointment.subject
    Definition

    The patient or group associated with the appointment, if they are to be present (usually) then they should also be included in the participant backbone element.

    ShortThe patient or group associated with the appointment
    Control10..1
    TypeReference(Patient, Group)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Appointment.participant
    Definition

    List of participants involved in the appointment.

    ShortParticipants involved in appointment
    Control1..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsapp-1: Either the type or actor on the participant SHALL be specified (type.exists() or actor.exists())
    ele-1: All FHIR elements must have a @value or children or both (hasValue() or (children().count() > id.count()))
    18. Appointment.participant.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Appointment.participant.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • Guidance on how to interpret the contents of this table can be foundhere

      0. Appointment
      2. Appointment.start
      Control1..?
      4. Appointment.subject
      Control1..?

      Guidance on how to interpret the contents of this table can be foundhere

      0. Appointment
      Definition

      A booking of a healthcare event among patient(s), practitioner(s), related person(s) and/or device(s) for a specific date/time. This may result in one or more Encounter(s).

      ShortA booking of a healthcare event among patient(s), practitioner(s), related person(s) and/or device(s) for a specific date/time. This may result in one or more Encounter(s)
      Control0..*
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsapp-2: Either start and end are specified, or neither (start.exists() = end.exists())
      app-3: Only proposed or cancelled appointments can be missing start/end dates ((start.exists() and end.exists()) or (status in ('proposed' | 'cancelled' | 'waitlist')))
      app-4: Cancellation reason is only used for appointments that have been cancelled, or noshow (cancellationReason.exists() implies (status='noshow' or status='cancelled'))
      app-5: The start must be less than or equal to the end (start.exists() implies start <= end)
      app-6: An appointment may have an originatingAppointment or recurrenceTemplate, but not both (originatingAppointment.exists().not() or recurrenceTemplate.exists().not())
      app-7: Cancellation date is only used for appointments that have been cancelled, or noshow (cancellationDate.exists() implies (status='noshow' or status='cancelled'))
      dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id.trace('id') in %resource.descendants().select(reference | as(uri))) or descendants().where(reference='#' | as(uri)='#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. Appointment.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resource id depends on the given use case.

      Control0..1
      Typeid
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      4. Appointment.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. Appointment.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. For DomainResources, if more than one implicitRules policy applies, additional policies may be conveyed using the additionalImplicitRules extension.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. Appointment.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHALL be taken from AllLanguages
      (required to http://hl7.org/fhir/ValueSet/all-languages|6.0.0-ballot5)

      IETF language tag for a human language

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. Appointment.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      This element is affected by the following invariants: dom-6
      TypeNarrative
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Appointment.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. Contained resources may be a resource type defined in the FHIR specification, or an additional resource.

      Control0..*
      This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
      TypeResource
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. Appointment.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Appointment.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. Appointment.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Must Supportfalse
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on Appointment.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 18. Appointment.identifier
          Definition

          This records identifiers associated with this appointment concern that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate (e.g. in CDA documents, or in written / printed documentation).

          ShortExternal Ids for this item
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..*
          TypeIdentifier
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          20. Appointment.status
          Definition

          The overall status of the Appointment. Each of the participants has their own participation status which indicates their involvement in the process, however this status indicates the shared status.

          Shortproposed | pending | booked | arrived | fulfilled | cancelled | noshow | entered-in-error | checked-in | waitlist | unknown
          Comments

          If the Appointment's status is "cancelled" then all participants are expected to have their calendars released for the appointment period, and as such any Slots that were marked as BUSY can be re-set to FREE.

          This element is labeled as a modifier because the status contains the code entered-in-error that mark the Appointment as not currently valid.

          Control1..1
          This element is affected by the following invariants: app-4, app-3, app-7
          BindingThe codes SHALL be taken from AppointmentStatus
          (required to http://hl7.org/fhir/ValueSet/appointmentstatus|6.0.0-ballot5)

          The free/busy status of an appointment.

          Typecode
          Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          22. Appointment.cancellationReason
          Definition

          The coded reason for the appointment being cancelled. This is often used in reporting/billing/further processing to determine if further actions are required, or specific fees apply.

          ShortThe coded reason for the appointment being cancelled
          Control0..1
          This element is affected by the following invariants: app-4
          BindingFor example codes, see AppointmentCancellationReason
          (example to http://hl7.org/fhir/ValueSet/appointment-cancellation-reason|6.0.0-ballot5)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          24. Appointment.class
          Definition

          Concepts representing classification of patient encounter such as ambulatory (outpatient), inpatient, emergency, home health or others due to local variations.

          ShortClassification when becoming an encounter
          Control0..*
          BindingThe codes SHOULD be taken from Encounter class
          (preferred to http://terminology.hl7.org/ValueSet/encounter-class)

          Classification of the encounter.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          26. Appointment.serviceCategory
          Definition

          A broad categorization of the service that is to be performed during this appointment.

          ShortA broad categorization of the service that is to be performed during this appointment
          Control0..*
          BindingFor example codes, see ServiceCategory
          (example to http://hl7.org/fhir/ValueSet/service-category|6.0.0-ballot5)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          28. Appointment.serviceType
          Definition

          The specific service that is to be performed during this appointment.

          ShortThe specific service that is to be performed during this appointment
          Comments

          For a provider to provider appointment the code "FOLLOWUP" may be appropriate, as this is expected to be discussing some patient that was seen in the past.

          Control0..*
          BindingFor example codes, see ServiceType
          (example to http://hl7.org/fhir/ValueSet/service-type|6.0.0-ballot5)
          TypeCodeableReference(HealthcareService)
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          30. Appointment.specialty
          Definition

          The specialty of a practitioner that would be required to perform the service requested in this appointment.

          ShortThe specialty of a practitioner that would be required to perform the service requested in this appointment
          Control0..*
          BindingFor example codes, see PracticeSettingCodeValueSet
          (example to http://hl7.org/fhir/ValueSet/c80-practice-codes|6.0.0-ballot5)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          32. Appointment.appointmentType
          Definition

          The style of appointment or patient that has been booked in the slot (not service type).

          ShortThe style of appointment or patient that has been booked in the slot (not service type)
          Control0..1
          BindingThe codes SHOULD be taken from hl7VS-appointmentReasonCodes
          (preferred to http://terminology.hl7.org/ValueSet/v2-0276)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          34. Appointment.reason
          Definition

          The reason that this appointment is being scheduled. This is more clinical than administrative. This can be coded, or as specified using information from another resource. When the patient arrives and the encounter begins it may be used as the admission diagnosis. The indication will typically be a Condition (with other resources referenced in the evidence.detail), or a Procedure.

          ShortReason this appointment is scheduled
          Control0..*
          BindingThe codes SHOULD be taken from EncounterReasonCodes
          (preferred to http://hl7.org/fhir/ValueSet/encounter-reason|6.0.0-ballot5)

          The Reason for the appointment to take place.

          TypeCodeableReference(Condition, DiagnosticReport, Procedure, Observation)
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          36. Appointment.priority
          Definition

          The priority of the appointment. Can be used to make informed decisions if needing to re-prioritize appointments. (The iCal Standard specifies 0 as undefined, 1 as highest, 9 as lowest priority).

          ShortUsed to make informed decisions if needing to re-prioritize
          Comments

          Seeking implementer feedback on this property and how interoperable it is.

          Using an extension to record a CodeableConcept for named values may be tested at a future connectathon.

          Control0..1
          BindingFor example codes, see ActPriority
          (example to http://terminology.hl7.org/ValueSet/v3-ActPriority)

          Indicates the urgency of the appointment.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          38. Appointment.description
          Definition

          The brief description of the appointment as would be shown on a subject line in a meeting request, or appointment list. Detailed or expanded information should be put in the note field.

          ShortShown on a subject line in a meeting request, or appointment list
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          40. Appointment.replaces
          Definition

          Appointment replaced by this Appointment in cases where there is a cancellation, the details of the cancellation can be found in the cancellationReason property (on the referenced resource).

          ShortAppointment replaced by this Appointment
          Control0..*
          TypeReference(Appointment)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          42. Appointment.virtualService
          Definition

          Connection details of a virtual service (e.g. conference call).

          ShortConnection details of a virtual service (e.g. conference call)
          Comments

          There are two types of virtual meetings that often exist:

          • a persistent, virtual meeting room that can only be used for a single purpose at a time,
          • and a dynamic virtual meeting room that is generated on demand for a specific purpose.

          Implementers may consider using Location.virtualService for persistent meeting rooms.

          If each participant would have a different meeting link, an extension using the VirtualServiceContactDetail can be applied to the Appointment.participant BackboneElement.

          Control0..*
          TypeVirtualServiceDetail
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          44. Appointment.supportingInformation
          Definition

          Additional information to support the appointment provided when making the appointment.

          ShortAdditional information to support the appointment
          Control0..*
          TypeReference(Resource)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          46. Appointment.previousAppointment
          Definition

          The previous appointment in a series of related appointments.

          ShortThe previous appointment in a series
          Comments

          This property is intended for use when representing a series of related appointments. For example, in a nuclear medicine procedure, where there is an appointment for the injection of the isotopes, and then a subsequent appointment for the scan, the scan appointment would refer to the injection appointment via Appointment.previousAppointment. For representing recurring appointments, see the guidance on recurring vs. series appointments.

          Control0..1
          TypeReference(Appointment)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          48. Appointment.originatingAppointment
          Definition

          The originating appointment in a recurring set of related appointments.

          ShortThe originating appointment in a recurring set of appointments
          Comments

          This property is intended for use when representing a recurring set of related appointments.

          For example, a patient undergoing physical therapy may have a recurring appointment every Tuesday and Thursday. Each occurrence of the set will refer to the originating appointment, which contains the recurring template information. For representing appointment series, see the guidance on recurring vs. series appointments.

          Control0..1
          This element is affected by the following invariants: app-6
          TypeReference(Appointment)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          50. Appointment.start
          Definition

          Date/Time that the appointment is to take place.

          ShortWhen appointment is to take place
          Comments

          If actual start/end times are not known then the requested period start/end can be used.

          Control1..1
          This element is affected by the following invariants: app-5, app-3, app-2
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          52. Appointment.end
          Definition

          Date/Time that the appointment is to conclude.

          ShortWhen appointment is to conclude
          Comments

          If actual start/end times are not known then the requested period start/end can be used.

          Control0..1
          This element is affected by the following invariants: app-5, app-3, app-2
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          54. Appointment.minutesDuration
          Definition

          Number of minutes that the appointment is to take. This can be less than the duration between the start and end times. For example, where the actual time of appointment is only an estimate or if a 30 minute appointment is being requested, but any time would work. Also, if there is, for example, a planned 15 minute break in the middle of a long appointment, the duration may be 15 minutes less than the difference between the start and end.

          ShortCan be less than start/end (e.g. estimate)
          Control0..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          56. Appointment.requestedPeriod
          Definition

          A set of date ranges (potentially including times) that the appointment is preferred to be scheduled within.

          The duration (usually in minutes) could also be provided to indicate the length of the appointment to fill and populate the start/end times for the actual allocated time. However, in other situations the duration may be calculated by the scheduling system.

          ShortPotential date/time interval(s) requested to allocate the appointment within
          Comments

          This does not introduce a capacity for recurring appointments.

          Control0..*
          TypePeriod
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          58. Appointment.slot
          Definition

          The slots from the participants' schedules that will be filled by the appointment.

          ShortThe slots that this appointment is filling
          Control0..*
          TypeReference(Slot)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          60. Appointment.account
          Definition

          The set of accounts that is expected to be used for billing the activities that result from this Appointment.

          ShortThe set of accounts that may be used for billing for this Appointment
          Comments

          The specified account(s) could be those identified during pre-registration workflows in preparation for an upcoming Encounter.

          Control0..*
          TypeReference(Account)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          62. Appointment.created
          Definition

          The date that this appointment was initially created. This could be different to the meta.lastModified value on the initial entry, as this could have been before the resource was created on the FHIR server, and should remain unchanged over the lifespan of the appointment.

          ShortThe date that this appointment was initially created
          Comments

          This property is required for many use cases where the age of an appointment is considered in processing workflows for scheduling and billing of appointments.

          Control0..1
          TypedateTime
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          64. Appointment.cancellationDate
          Definition

          The date/time describing when the appointment was cancelled.

          ShortWhen the appointment was cancelled
          Comments

          If the appointment was cancelled multiple times, this would reflect the most recent cancellation.

          Control0..1
          This element is affected by the following invariants: app-7
          TypedateTime
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          66. Appointment.note
          Definition

          Additional notes/comments about the appointment.

          ShortAdditional comments
          Comments

          Additional text to aid in facilitating the appointment. For instance, a note might be, "patient should proceed immediately to infusion room upon arrival"

          Where this is a planned appointment and the start/end dates are not set then this field can be used to provide additional guidance on the details of the appointment request, including any restrictions on when to book it.

          Typically only the concept.text will be used, however occasionally a reference to some generic documentation (or specific) and also supports coded instructions if/when they are required.

          Control0..*
          TypeAnnotation
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          68. Appointment.patientInstruction
          Definition

          While Appointment.note contains information for internal use, Appointment.patientInstructions is used to capture patient facing information about the Appointment (e.g. please bring your referral or fast from 8pm night before).

          ShortDetailed information and instructions for the patient
          Control0..*
          TypeCodeableReference(DocumentReference, Binary, Communication)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          70. Appointment.basedOn
          Definition

          The request this appointment is allocated to assess (e.g. incoming referral or procedure request).

          ShortThe request this appointment is allocated to assess
          Control0..*
          TypeReference(CarePlan, DeviceRequest, MedicationRequest, ServiceRequest, RequestOrchestration, NutritionOrder, VisionPrescription)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate NamesincomingReferral
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          72. Appointment.subject
          Definition

          The patient or group associated with the appointment, if they are to be present (usually) then they should also be included in the participant backbone element.

          ShortThe patient or group associated with the appointment
          Control1..1
          TypeReference(Patient, Group)
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          74. Appointment.participant
          Definition

          List of participants involved in the appointment.

          ShortParticipants involved in appointment
          Control1..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsapp-1: Either the type or actor on the participant SHALL be specified (type.exists() or actor.exists())
          ele-1: All FHIR elements must have a @value or children or both (hasValue() or (children().count() > id.count()))
          76. Appointment.participant.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          78. Appointment.participant.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Appointment.participant.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 80. Appointment.participant.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on Appointment.participant.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 82. Appointment.participant.type
              Definition

              Role of participant in the appointment.

              ShortRole of participant in the appointment
              Comments

              The role of the participant can be used to declare what the actor will be doing in the scope of this appointment.

              If the actor is not specified, then it is expected that the actor will be filled in at a later stage of planning.

              This value SHALL be the same when creating an AppointmentResponse so that they can be matched, and subsequently update the Appointment.

              Appointment.participant.type can be used to differentiate references of the same type, such as Locations, not just Practitioners or PractitionerRoles. For example, if an appointment is scheduled in a radiology department (Location #1), but has an arrival location of the North Check-in Desk (Location #2), then those locations could be differentiated using Appointment.participant.type.

              Control0..*
              This element is affected by the following invariants: app-1
              BindingUnless not suitable, these codes SHALL be taken from ParticipantType
              (extensible to http://hl7.org/fhir/ValueSet/encounter-participant-type|6.0.0-ballot5)

              Role of participant in encounter.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              84. Appointment.participant.period
              Definition

              Participation period of the actor.

              ShortParticipation period of the actor
              Control0..1
              TypePeriod
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              86. Appointment.participant.actor
              Definition

              The individual, device, location, or service participating in the appointment.

              ShortThe individual, device, location, or service participating in the appointment
              Comments

              Where a CareTeam is provided, this does not imply that the entire team is included, just a single member from the group with the appropriate role. Where multiple members are required, please include the CareTeam the required number of times.

              Control0..1
              This element is affected by the following invariants: app-1
              TypeReference(Patient, Group, Practitioner, PractitionerRole, CareTeam, RelatedPerson, Device, HealthcareService, Location)
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              88. Appointment.participant.required
              Definition

              Whether this participant is required to be present at the meeting. If false, the participant is optional.

              ShortThe participant is required to attend (optional when false)
              Comments

              For the use-case where two doctors need to meet to discuss the results for a specific patient, and the patient is not required to be present include the patient in the subject field, but do not include them as a participant - this was formerly done prior to R5 with required='information-only'.

              Control0..1
              Typeboolean
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              90. Appointment.participant.status
              Definition

              Participation status of the actor.

              Shortaccepted | declined | tentative | needs-action
              Control0..1
              BindingThe codes SHALL be taken from ParticipationStatus
              (required to http://hl7.org/fhir/ValueSet/participationstatus|6.0.0-ballot5)

              The Participation status of an appointment.

              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              92. Appointment.recurrenceId
              Definition

              The sequence number that identifies a specific appointment in a recurring pattern.

              ShortThe sequence number in the recurrence
              Control0..1
              TypepositiveInt
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              94. Appointment.occurrenceChanged
              Definition

              This appointment varies from the recurring pattern.

              ShortIndicates that this appointment varies from a recurrence pattern
              Comments

              For example, if a patient has physical therapy appointments every Tuesday and Thursday, but due to a national holiday, a single occurrence was rescheduled to a different day, while the rest of the recurring series remained on Tuesday / Thursday.

              Control0..1
              Typeboolean
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              96. Appointment.recurrenceTemplate
              Definition

              The details of the recurrence pattern or template that is used to generate recurring appointments.

              ShortDetails of the recurrence pattern/template used to generate occurrences
              Control0..*
              This element is affected by the following invariants: app-6
              TypeBackboneElement
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children or both (hasValue() or (children().count() > id.count()))
              98. Appointment.recurrenceTemplate.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              This element is affected by the following invariants: ele-1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              100. Appointment.recurrenceTemplate.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on Appointment.recurrenceTemplate.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 102. Appointment.recurrenceTemplate.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Appointment.recurrenceTemplate.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 104. Appointment.recurrenceTemplate.timezone
                  Definition

                  The timezone of the recurring appointment occurrences.

                  ShortThe timezone of the occurrences
                  Control0..1
                  BindingThe codes SHALL be taken from IANATimezones
                  (required to http://hl7.org/fhir/ValueSet/timezones|6.0.0-ballot5)

                  IANA Timezones (BCP 175)

                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  106. Appointment.recurrenceTemplate.recurrenceType
                  Definition

                  How often the appointment series should recur.

                  ShortThe frequency of the recurrence
                  Control1..1
                  BindingThe codes SHOULD be taken from AppointmentRecurrenceType
                  (preferred to http://hl7.org/fhir/ValueSet/appointment-recurrrence-type|6.0.0-ballot5)

                  IANA Timezones (BCP 175)

                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  108. Appointment.recurrenceTemplate.lastOccurrenceDate
                  Definition

                  Recurring appointments will not occur after this date.

                  ShortThe date when the recurrence should end
                  Control0..1
                  Typedate
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  110. Appointment.recurrenceTemplate.occurrenceCount
                  Definition

                  How many appointments are planned in the recurrence.

                  ShortThe number of planned occurrences
                  Control0..1
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  112. Appointment.recurrenceTemplate.occurrenceDate
                  Definition

                  The list of specific dates that will have appointments generated.

                  ShortSpecific dates for a recurring set of appointments (no template)
                  Control0..*
                  Typedate
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  114. Appointment.recurrenceTemplate.weeklyTemplate
                  Definition

                  Information about weekly recurring appointments.

                  ShortInformation about weekly recurring appointments
                  Control0..1
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children or both (hasValue() or (children().count() > id.count()))
                  116. Appointment.recurrenceTemplate.weeklyTemplate.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  118. Appointment.recurrenceTemplate.weeklyTemplate.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on Appointment.recurrenceTemplate.weeklyTemplate.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 120. Appointment.recurrenceTemplate.weeklyTemplate.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    SlicingThis element introduces a set of slices on Appointment.recurrenceTemplate.weeklyTemplate.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 122. Appointment.recurrenceTemplate.weeklyTemplate.daysOfWeek
                      Definition

                      Indicates which days of the week the appointment will occur on.

                      Shortmon | tue | wed | thu | fri | sat | sun
                      Control1..*
                      BindingThe codes SHALL be taken from DaysOfWeek
                      (required to http://hl7.org/fhir/ValueSet/days-of-week|6.0.0-ballot5)

                      The days of the week.

                      Typecode
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      124. Appointment.recurrenceTemplate.weeklyTemplate.weekInterval
                      Definition

                      The interval defines if the recurrence is every nth week. The default is every week, so it is expected that this value will be 2 or more.

                      e.g. For recurring every second week this interval would be 2, or every third week the interval would be 3.

                      ShortRecurs every nth week
                      Control0..1
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      126. Appointment.recurrenceTemplate.monthlyTemplate
                      Definition

                      Information about monthly recurring appointments.

                      ShortInformation about monthly recurring appointments
                      Control0..1
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children or both (hasValue() or (children().count() > id.count()))
                      128. Appointment.recurrenceTemplate.monthlyTemplate.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      130. Appointment.recurrenceTemplate.monthlyTemplate.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      SlicingThis element introduces a set of slices on Appointment.recurrenceTemplate.monthlyTemplate.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 132. Appointment.recurrenceTemplate.monthlyTemplate.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        SlicingThis element introduces a set of slices on Appointment.recurrenceTemplate.monthlyTemplate.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 134. Appointment.recurrenceTemplate.monthlyTemplate.dayOfMonth
                          Definition

                          Indicates that appointments in the series of recurring appointments should occur on a specific day of the month.

                          ShortRecurs on a specific day of the month
                          Control0..1
                          TypepositiveInt
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supportfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          136. Appointment.recurrenceTemplate.monthlyTemplate.nthWeekOfMonth
                          Definition

                          Indicates which week within a month the appointments in the series of recurring appointments should occur on.

                          Shortfirst | second | third | fourth | last
                          Control0..1
                          BindingThe codes SHALL be taken from WeekOfMonth
                          (required to http://hl7.org/fhir/ValueSet/week-of-month|6.0.0-ballot5)

                          The set of weeks in a month.

                          Typecode
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supportfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          138. Appointment.recurrenceTemplate.monthlyTemplate.dayOfWeek
                          Definition

                          Indicates which day of the week the recurring appointments should occur each nth week.

                          Shortmon | tue | wed | thu | fri | sat | sun
                          Comments

                          This property is intended to be used with Appointment.recurrenceTemplate.monthly.nthWeek.

                          Control0..1
                          BindingThe codes SHALL be taken from DaysOfWeek
                          (required to http://hl7.org/fhir/ValueSet/days-of-week|6.0.0-ballot5)

                          The days of the week.

                          Typecode
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supportfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          140. Appointment.recurrenceTemplate.monthlyTemplate.monthInterval
                          Definition

                          Indicates that recurring appointments should occur every nth month.

                          ShortRecurs every nth month
                          Control1..1
                          TypepositiveInt
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supportfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          142. Appointment.recurrenceTemplate.yearlyTemplate
                          Definition

                          Information about yearly recurring appointments.

                          ShortInformation about yearly recurring appointments
                          Control0..1
                          TypeBackboneElement
                          Is Modifierfalse
                          Must Supportfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children or both (hasValue() or (children().count() > id.count()))
                          144. Appointment.recurrenceTemplate.yearlyTemplate.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          This element is affected by the following invariants: ele-1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          146. Appointment.recurrenceTemplate.yearlyTemplate.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          SlicingThis element introduces a set of slices on Appointment.recurrenceTemplate.yearlyTemplate.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 148. Appointment.recurrenceTemplate.yearlyTemplate.modifierExtension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                            ShortExtensions that cannot be ignored even if unrecognized
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                            Summarytrue
                            Requirements

                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                            Alternate Namesextensions, user content, modifiers
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            SlicingThis element introduces a set of slices on Appointment.recurrenceTemplate.yearlyTemplate.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 150. Appointment.recurrenceTemplate.yearlyTemplate.yearInterval
                              Definition

                              Appointment recurs every nth year.

                              ShortRecurs every nth year
                              Control1..1
                              TypepositiveInt
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supportfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              152. Appointment.recurrenceTemplate.excludingDate
                              Definition

                              Any dates, such as holidays, that should be excluded from the recurrence.

                              ShortAny dates that should be excluded from the series
                              Comments

                              excludingDate is an alternative to excludingRecurrenceId. You may say either that 12/25/XXXX should be excluded using excludingDate, or you may indicate the recurrenceId of the appointment that would fall on the excluded date in the excludingRecurrenceId property.

                              Control0..*
                              Typedate
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supportfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              154. Appointment.recurrenceTemplate.excludingRecurrenceId
                              Definition

                              Any dates, such as holidays, that should be excluded from the recurrence.

                              ShortAny recurrence IDs that should be excluded from the recurrence
                              Comments

                              excludingRecurrenceId is an alternative to excludingDate. You may say either that 12/25/XXXX should be excluded using excludingDate, or you may indicate the recurrenceId of the appointment that would fall on the excluded date in the excludingRecurrenceId property.

                              Control0..*
                              TypepositiveInt
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supportfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))